[Librem-5-dev] Building and testing your own kernel

Dorota Czaplejewicz dorota.czaplejewicz at puri.sm
Fri Dec 28 01:02:13 PST 2018

On Fri, 28 Dec 2018 10:04:16 +0800
Andy Green via Librem-5-dev <librem-5-dev at lists.community.puri.sm> wrote:

> On 28/12/2018 07:18, David Boddie via Librem-5-dev wrote:
> > On Thu Dec 27 03:43:39 PST 2018, Dorota Czaplejewicz wrote:
> >   
> >> Hi Andy,
> >>
> >> thank you for doing that work. We're normally building the kernel
> >> using image-builder [0], and we're currently using .debs for the
> >> kernel.  
> > 
> > Thanks, Andy!
> >   
> >> I feel like this information belongs on some wiki, but we don't
> >> have one set up yet. I've started putting random useful info on
> >> my own page [1]. David, do you have any ideas?  
> > 
> > I have been using my fork of the documentation for stashing notes
> > about things:
> > https://source.puri.sm/david.boddie/developer.puri.sm/wikis/home
> > 
> > We could just enable the wiki for the documentation:
> > https://source.puri.sm/Librem5/developer.puri.sm/wikis/home
> > 
> > Andy, does that sound like it might be a useful place for you to
> > put stuff? We could use it as a staging area for things that
> > should end up in the documentation.  
> Yes I think you're going to need the wiki.  Many developers will stay 
> on-piste and just follow the blessed, existing flow, but part of the 
> whole idea is some won't.  Then it will get expensive doing 1:1 chat for 
> every detail needed to get them started.
> Information rots quickly but even so it usually doesn't all rot at the 
> same rate and is worth keeping for a while.  At least information in the 
> wiki that is rotting can be updated by others when they see it's out of 
> date, which is harder to do for "documentation".
> I cloned it, added an article .md by hand, and registered my ssh pubkey 
> with the site, but I can't push it back.
> $ git push 
> ssh://warmcat@source.puri.sm/Librem5/developer.puri.sm.wiki.git 
> +master:master
> warmcat at source.puri.sm's password:
> It should be using the key... do I need some extra permissions, 
> different URL, etc?
The URL I'm getting from GitLab is in the form: git at source.puri.sm:dorota.czaplejewicz/extra_docs.wiki.git

I'm not sure if this matters, and I haven't tried it, but it's an obvious difference I noticed.

Can you check if you can edit the wiki via the web interface, or whether you can file an issue? I figure we might have a permission problem.


> -Andy
> > David
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.community.puri.sm/pipermail/librem-5-dev/attachments/20181228/fd19d5cf/attachment.sig>

More information about the Librem-5-dev mailing list