[Librem-5-dev] Difficulties with serial of USB

Jeremiah C. Foster jeremiah.foster at puri.sm
Thu Feb 7 05:44:50 PST 2019


On Wed, 2019-02-06 at 14:31 -0800, Angus Ainslie via Librem-5-dev
wrote:
>     Hi Jeremiah,

Thanks for the reply Angus,

>     On 2019-02-06 1:33 p.m., Jeremiah C. Foster via Librem-5-dev
> wrote:
> 
>     
> > Hi,
> > 
> >       
> > 
> >       My devkit shows up in dmesg;
> > 
> >       
> > 
> >       #  dmesg | grep cdc
> > 
> >       [10232.643261] cdc_acm 1-6.1:1.1: ttyACM0: USB ACM device
> > 
> >       [10232.647089] usbcore: registered new interface driver
> > cdc_acm
> > 
> >       [10232.647095] cdc_acm: USB Abstract Control Model driver for
> > USB
> > 
> >       modems and ISDN adapters
> > 
> >       [10245.873686] cdc_acm 1-6.1:1.1: failed to set dtr/rts
> > 
> >       
> > 
> >       But it disappears at some point because I cannot find it in
> > /dev/
> >       nor
> > 
> >       connect using picocom. 
> > 
> >       
> > 
> >       When I reboot the device into another mode than emmc, it
> > shows up
> >       as a
> > 
> >       USB HID which I imagine is the expected behavior. I'm working
> > from
> > 
> >       here: 
> > 
> > https://developer.puri.sm/Librem5/Development_Environment/Boards/imx8.html#dev-board-figure
> > 
> >       
> > 
> >       I wonder if anyone else has seen this behavior?
> > 
> >     
> 
>     Is this with the image the devkit originally shipped with or has
>       it been upgraded ?

Yes, this is the original image.

>  If it was upgraded do you know which version
>       you upgraded to ?
> 
>     
> 
>     Did you install a debug header so that we can see the console
>       output ? 

Will do.

> If not can you ssh to the devkit and get the logs from
>       that side ?

So far I haven't been able to because the IP 192.168.42.202 is not
showing up. It may be that DHCP is handing out another IP address the
MAC because I see 'pureos-test' showing up in my LAN. So far ssh has
been reluctant to let me in as 'purism' but I think I'll try again as
root when I see the MAC on my LAN again. 

Cheers,

Jeremiah
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.community.puri.sm/pipermail/librem-5-dev/attachments/20190207/19f197ca/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: This is a digitally signed message part
URL: <http://lists.community.puri.sm/pipermail/librem-5-dev/attachments/20190207/19f197ca/attachment.sig>


More information about the Librem-5-dev mailing list