[Librem-5-dev] Dev kit booting

[Zoltan Gyarmati]

Dear Angus&All, 

Thanks for the good news, i suppose many of us is looking forward to
receive our devkits :) 

This "https://int.puri.sm [1]" is an internal Purism wiki, or it's also
available for mere mortals? I couldn't find a register form. 

Regards,
Zoltan Gyarmati
https://zgyarmati.de 

On 2018-10-19 17:38, Angus Ainslie via Librem-5-dev wrote:

> This is what the boot looks like to me :)
> 
> Console only at this point
> 
> U-Boot 2017.03-g8c2e4f9c2f (Oct 19 2018 - 08:07:33 -0700), Build:
> jenkins-u-boot_builds-ec-som_uboot_CI_build-140
> 
> CPU:   Freescale i.MX8MQ rev2.0 1500 MHz (running at 1000 MHz)
> CPU:   Commercial temperature grade (0C to 95C) at 66C
> Reset cause: POR
> Model: Emcraft i.MX8M SOM LPDDR4-1600
> DRAM:  3 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> MMC: no card present
> mmc_init: -123, time 2
> *** Warning - MMC init failed, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> MMC: no card present
> mmc_init: -123, time 2
> Detect USB boot. Will enter fastboot mode!
> unsupported boot devices
> Net:   eth0: ethernet at 30be0000
> Fastboot: Normal
> Boot from USB for mfgtools
> Use default environment for                              mfgtools
> Run bootcmd_mfg: run mfgtool_args;booti ${loadaddr} ${initrd_addr}
> ${fdt_addr};
> Hit any key to stop autoboot:  0
> Bad Linux ARM64 Image magic!
> u-boot=>
> 
> On 10/19/18 9:37 AM, Heather Ellsworth via Librem-5-dev wrote: So exciting, great job!!! Do you happen to have a picture to share that
> shows what it looks like once it's booted?
> 
> On 10/19/2018 09:32 AM, Eric Kuzmenko via Librem-5-dev wrote: Awesome job, Angus!
> 
> On 10/19/18 11:23 AM, Angus Ainslie via Librem-5-dev wrote: Hi All,
> 
> The devkit can finally boot using linux on the host.
> 
> Instructions are here
> 
> https://int.puri.sm/dev/librem-5/emcraft-bsb#booting-the-devkit-using-the-usb-serial-downloader
> 
> Cheers
> 
> Angus
> 
> _______________________________________________
> Librem-5-dev mailing list
> Librem-5-dev at lists.puri.sm
> https://lists.puri.sm/listinfo/librem-5-dev _______________________________________________
> Librem-5-dev mailing list
> Librem-5-dev at lists.puri.sm
> https://lists.puri.sm/listinfo/librem-5-dev
 _______________________________________________
Librem-5-dev mailing list
Librem-5-dev at lists.puri.sm
https://lists.puri.sm/listinfo/librem-5-dev
_______________________________________________
Librem-5-dev mailing list
Librem-5-dev at lists.puri.sm
https://lists.puri.sm/listinfo/librem-5-dev 

 

Links:
------
[1]
https://int.puri.sm/dev/librem-5/emcraft-bsb#booting-the-devkit-using-the-usb-serial-downloader
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.puri.sm/pipermail/librem-5-dev/attachments/20181020/852d4b45/attachment-0001.html>